his Digi-Code model 5150 also known as the DC-5150 is a one channel, 12 or 24 volt, F-connector type antenna gate or garage door opener radio receiver that works with all Digi-Code, Multi-Code and Stanley remote controls that have 10 DIP type code
switches on 300Mhz or 310Mhz. This radio receiver features auto voltage sensing for 12 or 24 volt AC or DC systems and can work on Multi-Code 300MHz or Stanley 310MHz frequencies by changing an internal jumper. The Digi-Code 5150 receiver can control
one garage door opener or gate motor and can be used as a replacement or upgrade of older radio receivers. Having an F-connector type antenna allows for the antenna to be remotely located from the receiver using the optional Digi-Code 5166 remote antenna
kit (sold separately) to obtain maximum receiver range especially if the receiver is located inside a metal enclosure that would block the remotes signal. This is a brand new item that comes in a plain white dealer box. Includes 8" wire antenna and
programming instructions.
The Digi-Code 5150 radio receiver is directly compatible with the following 300MHz model remotes to control one device:
Carper: CX-300
Challenger (by Martec): 111412, 109157, 109158, 110517, 110518, MC1010T, MC1020T.
Chamberlain: 300MC
TriCode (by Chamberlain): TC-1, TC-2 TC-3 (when set to Multi-Code mode)
Digi-Code: 5010, 5030, 5040, 5060, 5070.
Keystone Heddolf: M219-1KA, M220-1KA, M220-1KB.
Multi-Code (by Linear): 3089, 3060, 3070, 4120, 4140, 3083, MCS308911, MCS306010, MCS307010, MCS412001, MCS414001, MCS308301.
Not compatible with the model MCS308913 that is on the 310MHz frequency
Multi Elmac: 3089.
Transmitter Solutions: 300MCD21K3, 300MCD21V2, 300MCD22K3, 300MCD22V2.
Not all compatible models may be listed.
The Digi-Code 5150 radio receiver is directly compatible with the following 310MHz model remotes to control one device:
Chamberlain TriCode: TC-1, TC-2, TC-4 (when set to Stanley mode).
Challenger: 111635
Digi-Code: 5012, 5062, 5032, 5042, 5072.
Heddolf: S219-1KA, S220-1KA, S220-1KB.
Multi-Code: 1050, 1094, 1097, 1082, 308302, MCS105015, MCS308913, MCS109410, MCS109710, MCS108210, MCS308302.
Transmitter Solutions: 310MCD21V2, 310MCD21K3.
Stanley: 038, 1040, 1044, 1047, 1049, 1050, 1076, 1079, 1082, 1100, 24911, 51-4271, 51-4272, 51-4273, 51-4369, 51-4726, 105015, 308302, 108210, 109410, 109710, 308913, 1050-T.
Stanley openers have also gone under the names of Vemco, Whistler and U-Install.
Zareba: GKF1, GT1, GT2, GT3.
Not all compatible models may be listed.
Product Features:
Activates one gate or garage door opener
Dual frequency can be set to either 300MHz or 310MHz mode by internal jumper
Auto voltage sensing no jumper needed to set operating voltage
4-Wire Connection
Ideal for use on gate openers
Optional remote antenna mounting kit for maximum range sold separately
One-Year manufacturers warranty
Specifications:
Power: 12-30 Volts AC or 10.5-30 Volts DC
Frequency: 300MHz or 310 MHz jumper selectable
Codes: 1,024 (set by dip switches)
Dimensions: 5.5 x 4.5 x 1.5 inches (excluding antenna connector and plastic screw hole tab)
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for you. If you need to contact us for assistance please have the Make and
Model number of the garage door opener, radio receiver or transmitter. We would rather have you contact us than end up with the wrong item and have to return it.
