The Heddolf P330-1KB wireless digital entry keypad can be used with the trinary code switch models of radio receivers made by Allstar, Allister, Heddolf or Pulsar that operate on the 318MHz frequency and is also compatible with the newer Allstar MVP receivers. This keypad can have up to 60 4-digit user codes and one master 4-digit programming code and each code can be individually removed and changed as needed as the code are stored as a 2-digit memory location (01-60) and then the 4-digt user code. The master programming code can also be changed if needed without affecting the user codes and if needed the keypad can be reset to the factory default erasing all codes. A Keypad back illumination feature comes on when any key is pressed and then the 4-digit user code can be entered makes using the keypad in low light conditions easier. This back illumination stays on for five seconds between keystrokes and goes out within 2 seconds of a valid code being entered to help conserve battery consumption. As a security feature the keypad will lockout for 40 seconds if 4 incorrect code attempts are made so even if a correct code is entered during the lockout time it would not send the signal to activate the opener. Featuring a stainless-steel faceplate and weather resistant enclosure the keypad can be mounted to a wall or pedestal as needed and can also be hard wired to a 12-volt gate opener eliminating the need for batteries. The radio signal duration can be adjusted from 1 to 4 seconds using the internal jumper and the front panel multi-color LED indicates the different statuses of key pressed, correct code entered, battery low, in program mode and program error.
This keypad is only available for the 318MHz frequency versions of radio receivers and will not work with the 288MHz models.
Compatible with Allstar Allister Pulsar 104078, TK3500, 9931-WKE, 110927 Linear 190-104078, 190-110927 Apollo 926 using Allstar Allister Pulsar 318MHz Remote.
Product Features:
60 user code capacity
Illuminated keys for easy nighttime viewing
Programming of user codes and master code done directly from keypad
Low battery LED indicator
Memory retained during low or while changing batteries
Can be hard wired to 12-volt gate openers
One-Year manufactures warranty
Product Specifications:
Power: 6 volts using four 1.5V AA alkaline batteries (not included)
Frequency: 318MHz
Codes: 19,638 set by 9 three position (+ 0 -) code switches
Entry Codes: Up to 60 4-digit user PIN codes
Dimensions: 6.1/8 x 3 1/2 and 2 1/8 at top, 1 9/16 at bottom depths
If you are not positive that this is the correct item for you, please email us. We are more than happy to assist you in determining the correct item for you. If you need to contact us for assistance please have the Make and Model number of the garage door opener, radio receiver or transmitter. We would rather have you contact us than end up with the wrong item and have to return it.