This Access Solutions model 2010 is a one channel, 3-tab, 24-volt standard gate or garage door opener radio receiver that works with all Multi-Code and
Digi-Code compatible remote control transmitters that have 10 DIP
type code switches on the 300MHz frequency. This receiver can easily connect to garage door openers or gate openers that have the standard three screw type terminal block with 24-volt power available. Controls one garage
door opener or gate motor and can be used as a replacement or upgrade of older radio receivers. Not recommend for gate openers that have a metal cover unless the receiver's antenna can be located outside the metal enclosure. This
is a brand new item that comes in a plastic bag and includes programming instructions.
The Access Solutions receiver is directly compatible with the following remotes to control one device:
Carper: CX-300
Challenger: MC1010, MC1020, MC4210, MC4220
Digi-Code: 5010, 5030, 5040, 5060, 5070.
Heddolf: M219, M220, 220-300, 219-300.
Multi-Code: 1089, 3060, 3070, 3083, 3089, 4120, 4140, MCS306010, MCS307010, MCS308301, MCS308911, MCS412001, MCS414001
Multi-Elmac: All models.
Tri-Code: (when set to Multi-Code mode) TC-1, TC-2, TC-4
Not all compatible models may be listed.
Product Features:
Activates one gate or garage door opener
11" Wire lead antenna
3-Tab connector
One-Year manufacturers warranty
Specifications:
Power: 24 volts AC/DC
Frequency: 300MHz
Codes: 1,024 (set by dip switches)
Dimensions: 5.0 x 1.25 x 4.0 inches (includes plastic tabs)
If you are not positive that this is the correct item for you, please email us. We are more that happy to assist you in determining the correct item for you. If you need to contact us for assistance please have the Make and
Model number of the garage door opener, radio receiver or transmitter. We would rather have you contact us than end up with the wrong item and have to return it.
